Round Vent (Click image to enlarge) |
![]() |
![]() |
|
Closeable Square Vent (Click image to enlarge) |
![]() |
![]() |
|
|
|
Individual Swithces: 15 Amp 120 Volt/Devices Total: 20 Amp 120 Volt. Decora Dual Rocker Combination Switch w/ Ground Screw Terminals and Push-in Wiring — White.
|
|||
|
|
Individual Switches: 15 Amp 120 Volt/Device Total 20 Amp 120 Volt. Decora Three Rocker Combination Switches w/ Ground Screw Terminals and push-in wiring — White
|
|||
Remote Controls
When choosing the X-10 system, you will typically need one X-10 Remote control system per home and one appliance module per fan. For example, if you have 3 fans, you will need one transceiver, one remote and 3 appliance modules.
NOTE: An X-10 system is not required with our fan. You may use other remote systems or hard wire the fan to a household switch.
|
Want to control devices from more than one remote? Expanding is incredibly easy! Add as many handheld remotes as you want. As long as they're set to the same house code as the base, they will control the same devices. As an added benefit, the plug-in base also doubles as a two-way X10 appliance module that responds to unit code 1 or 9.
Compatibility: Use with any device connected to an X10 Appliance Module |
|
|
Use with each SBS Fan installed in your home. Each X10 module is given its own address by selecting a letter (house code) and number (unit code) on the 2 dials. Rated for 15 amps, or 1/3 Hp.
X10 Product No.: AM466 |
|
|
The expandable RF Base includes a built-in appliance module which responds to unit codes 1 or 9 on the housecode chosen. The appliance module can be controlled by wireless control or from another hardwired X10 transmitter. Like other Appliance Modules, it too is rated for 500 watts incandescent, 1/3 HP motor loads, and 15 amps resistive load.
X10 Product No.: RR501 |
|
|
X10 Product No.: HR12A |
|







Go